CAP & CLOSURE · PP+PP · 16 CAVITIES
20MM TWO COLOR FLIP TOP CAP MOLD
High-cavity two-color closure tooling for compact 20 mm flip-top caps used on shampoo, cosmetic and detergent packaging. The published reference combines PP+PP molding, hardened 1.2344 steel and an 8-tip hot-runner system for rotary-table production.

REFERENCE SPECIFICATION
- Product material: PP + PP
- Mold cavity: 16
- Mold steel: German DIN 1.2344, 48–50 HRC
- Runner system: 8-tip hot runner
- Mold size: 730 × 500 × 591 mm
- Mold weight: 1,050 kg
- Suggested machine: 280-ton two-color rotary-table machine
APPLICATIONS
- Shampoo and personal-care bottles
- Cosmetic and lotion packaging
- Household detergent closures
- Small-diameter branded flip-top caps
Closure Engineering for Small Two-Color Caps
At only 20 mm diameter, the cap leaves limited space for cooling channels, internal ribs and ejection features. The connection bridge between colors must remain flexible enough for repeated opening while maintaining reliable sealing and avoiding visible gate or ejector marks.

Key Tooling Considerations
- Balance filling across 16 cavities and maintain consistent two-color junctions.
- Control PP shrinkage for cap fit, hinge flexibility and specified opening position.
- Design cooling around small-diameter ribs and functional sealing surfaces.
- Protect visible surfaces from gate marks, flash and ejection witness marks.
- Match rotary indexing, mold dimensions and weight to the customer’s machine.

Frequently Asked Questions
Can this mold be adapted for another cap diameter?
Yes, but cap diameter, hinge geometry, bottle-neck fit, cavity count, cooling and machine specification must be reviewed as a new tooling configuration.
Why use 1.2344 hardened steel?
The published project uses German DIN 1.2344 hardened to 48–50 HRC to support wear resistance and precision in the small internal cap features.
What information is required for quotation?
Send the 3D cap drawing, bottle-neck specification, PP grades, target cavity count, annual volume, closure tests and the two-color injection-machine specification.
REQUEST A 2K CAP MOLD REVIEW
Share your cap design, resin, output target and machine details for a production-oriented DFM review and quotation.
