12+12 Cavity 2K Toothbrush Handle Mold Case Study

CASE STUDIES / ENGINEERING PROJECT

HIGH-CAVITY ORAL CARE TOOLING

CASE STUDY: 12+12 CAVITY 2K TOOTHBRUSH HANDLE MOLD

A high-cavity two-shot toothbrush handle reference using PETG and TPE. The published configuration combines 12+12 cavities, Germany S420 steel and a 24-tip YUDO valve-gate hot runner for a compact consumer product with demanding cosmetic and bonding requirements.

PUBLISHED PROJECT SPECIFICATIONS

Publicly listed reference data from Focare Mould. Final mold construction is confirmed after reviewing the customer drawing, resin grades, tolerances and production machine.

PRODUCT MATERIAL

PETG + TPE

MOLD CAVITY

12+12

MOLD STEEL

Germany S420

HOT RUNNER

24-tip YUDO valve gate

MOLD SIZE / WEIGHT

558 × 711 × 572 mm / 1,718 kg

MACHINE REFERENCE

250-ton two-shot rotary-shaft machine

CASE STUDY ENGINEERING FOCUS

ENGINEERING PRIORITIES FOR HIGH-CAVITY 2K MOLDING

01

CAVITY-TO-CAVITY BALANCE

Twenty-four valve-gate points must deliver repeatable filling across both shots without creating visible gate or color variation.

02

ROTARY CORE POSITIONING

The transfer mechanism must return every first-shot substrate accurately before the TPE shot is injected.

03

COSMETIC MATERIAL BOUNDARY

Shut-offs, venting and gate timing must protect the clean separation expected on an oral-care handle.

ENGINEERING ANALYSIS

SCALING TWO-SHOT QUALITY TO 12+12 CAVITIES

High-cavity production multiplies small variations in runner balance, steel temperature, transfer position and venting. A stable design therefore links the rotary mechanism, cavity layout, 24-tip valve-gate system and cooling circuits instead of treating them as separate subsystems.

PUBLISHED PROJECT REFERENCE

Focare Mould publishes PETG+TPE, 12+12 cavities, Germany S420 steel, a 24-tip YUDO valve-gate system and a 250-ton two-shot rotary-shaft machine for this reference. The same source lists a different 8+8 PP+TPR configuration; the two specifications are not combined here.

View the published specification source

BUYER QUESTIONS

2K TOOTHBRUSH HANDLE MOLD FAQ

Why use valve gates for a high-cavity toothbrush handle mold?

Valve-gate control can support balanced sequential filling and cleaner gate appearance, but the manifold, timing and process window must be validated for the selected resin grades.

Can the handle material pair be changed?

Yes, but PETG, PP, TPE and TPR combinations require separate compatibility, shrinkage and bonding reviews. A published configuration should not be copied without material validation.

HAVE A SIMILAR TOOLING CHALLENGE?

Share your toothbrush handle drawing, material pair, cavity target and two-shot machine data for a tooling review.