2K Collapsible Laundry Basket Mold Case Study

CASE STUDIES / ENGINEERING PROJECT

LARGE-FORMAT HOUSEHOLD TOOLING

CASE STUDY: 2K COLLAPSIBLE LAUNDRY BASKET MOLD

A published 2K tooling reference for a large collapsible laundry basket that combines a rigid PP structure with flexible TPE functional zones. The engineering challenge is to coordinate large-part filling, material interfaces and machine capacity in one 1+1 cavity mold.

PUBLISHED PROJECT SPECIFICATIONS

Publicly listed reference data from Focare Mould. Final mold construction is confirmed after reviewing the customer drawing, resin grades, tolerances and production machine.

PRODUCT MATERIAL

PP + TPE

MOLD CAVITY

1+1

MOLD STEEL

718

HOT RUNNER

12-tip hot runner

MOLD SIZE

1160 × 970 × 585 mm

MACHINE REFERENCE

550-ton two-color machine

CASE STUDY ENGINEERING FOCUS

ENGINEERING PRIORITIES FOR A LARGE COLLAPSIBLE PART

01

LARGE-PART FILLING BALANCE

A wide basket footprint and long flow paths require gate placement and runner balance to be reviewed together.

02

RIGID–FLEXIBLE INTERFACE CONTROL

PP provides the structural frame while TPE forms collapsible or soft-contact areas, so shut-offs and interface geometry are critical.

03

MOLD–MACHINE MATCHING

The published 3,752 kg mold and 550-ton machine reference show why clamp force, platen size and opening stroke must be confirmed early.

ENGINEERING ANALYSIS

FROM COLLAPSIBLE PRODUCT GEOMETRY TO A 1+1 CAVITY TOOL

The primary engineering task is not simply adding a second material. The mold must control deformation in the rigid PP sections, protect the flexible TPE zones from flash and maintain repeatable transfer between shots. Cooling, ejection and handling are reviewed around the full 1160 × 970 × 585 mm mold envelope.

PUBLISHED PROJECT REFERENCE

Focare Mould lists PP+TPE, a 1+1 cavity layout, 718 steel, a 12-tip hot runner and a suggested 550-ton two-color machine for this configuration. Final design remains dependent on the customer drawing, resin grades and production press.

View the published specification source

BUYER QUESTIONS

COLLAPSIBLE LAUNDRY BASKET MOLD FAQ

Why does a large foldable basket need early machine verification?

Mold weight, platen dimensions, tie-bar spacing, clamp force and opening stroke can limit installation. These values should be checked before the mold layout is frozen.

What information is required for a similar project?

Provide the 3D product drawing, PP and TPE grades, target volume, expected cycle requirement and the full specification of the available two-color machine.

HAVE A SIMILAR TOOLING CHALLENGE?

Send your foldable houseware drawing, resin grades and machine specification for a DFM and tooling review.