CASE STUDIES / ENGINEERING PROJECT

PRECISION INDUSTRIAL SEAL TOOLING

CASE STUDY: 75MM TWO COLOR SEAL RING MOLD

A published 8+8 cavity two-color seal-ring tooling reference developed around concentric alignment, sealing-surface quality and balanced multi-cavity filling. The 75 mm configuration uses European 2316 steel and a 16-tip YUDO hot-runner system.

PUBLISHED PROJECT SPECIFICATIONS

Publicly listed reference data from Focare Mould. Final mold construction is confirmed after reviewing the customer drawing, resin grades, tolerances and production machine.

PRODUCT SIZE

75 mm seal ring

MOLD CAVITY

8+8

MOLD STEEL

European 2316

RUNNER SYSTEM

16-tip YUDO hot runner

MATERIAL PAIR

Defined by sealing application

MACHINE REFERENCE

Matched after DFM review

CASE STUDY ENGINEERING FOCUS

ENGINEERING PRIORITIES FOR TWO-COLOR SEAL RINGS

01

CONCENTRIC ALIGNMENT

The rigid and sealing zones must remain accurately positioned around the full circumference.

02

FLASH CONTROL AT THE SEAL

Shut-off conditions and parting-line strategy must protect the functional sealing surface.

03

BALANCED 8+8 FILLING

A 16-tip hot-runner system must deliver stable thermal and pressure conditions across all cavities.

PROJECT PHOTO GALLERY

TWO-COLOR SEAL RING MOLD DETAILS

Official Focare Mould project images showing the 75 mm mold layout, finished two-color seal-ring samples and a larger 160 mm tooling reference.

75MM · 8+8 CAVITY MOLD DESIGN

TWO-COLOR SEAL RING PRODUCT SAMPLES

RIGID AND SEALING MATERIAL ZONES

160MM · 4+4 CAVITY REFERENCE DESIGN

ENGINEERING ANALYSIS

PROTECTING THE FUNCTIONAL SEALING SURFACE

For a two-color seal ring, cosmetic quality is secondary to functional geometry. The tool must maintain roundness, material boundary accuracy and repeatable shut-off conditions while allowing clean ejection. Material compatibility, compression requirements and allowable flash are confirmed from the customer drawing and application.

PUBLISHED PROJECT REFERENCE

Focare Mould lists a 75 mm 8+8 cavity configuration with European 2316 steel and a 16-tip YUDO hot runner. The public source does not specify one universal material pair or machine size, so those values must be confirmed for each sealing application.

View the published specification source

BUYER QUESTIONS

TWO COLOR SEAL RING MOLD FAQ

What determines the best rigid and soft material pair?

Media exposure, temperature, compression set, hardness, chemical compatibility and bonding requirements must all be reviewed. The specific resin grades should be tested rather than inferred from generic polymer names.

Why is flash control especially important?

Flash on a sealing edge can affect assembly and leak performance. Product tolerances, shut-off geometry, mold stiffness and process pressure must therefore be evaluated together.

HAVE A SIMILAR TOOLING CHALLENGE?

Send the seal-ring drawing, media, operating temperature, material requirements and annual volume for a tooling assessment.