HOUSEHOLD TOOLING · 1+1 CAVITY

TWO COLOR FOLDABLE BASIN MOLD

A space-saving household product requires accurate alignment between the rigid support structure and the flexible folding zone. This reference project combines 1+1 cavities, 718H steel and a four-tip hot runner in a large-format two-shot tool.

Two color foldable basin mold and finished collapsible basin

Reference view: mold construction and the finished collapsible basin. The image is shown at its natural aspect ratio.

PROJECT OVERVIEW

This two color mold reference is intended for a foldable household basin with a rigid frame and a flexible collapsible body. The tooling concept must control interface alignment, sealing and repeatable transfer between the two material stages.

Typical applications: household basins, camping wash basins, compact storage products and other rigid-soft collapsible housewares.

PUBLISHED PROJECT SPECIFICATIONS

Product dimensions: Ø377.5 × 47.4 mm
Published product weight: 301.8 + 194.3 g
Mold cavity: 1+1
Mold steel: 718H, 30–33 HRC
Injection system: 4-tip hot runner
Mold dimensions: 1090 × 740 × 536 mm
Mold weight: 2357 kg

These values describe the published reference project. Final steel, resin pair, runner layout, shrinkage allowance and machine interface must be confirmed against the customer drawing, material data and molding machine.

Foldable basin mold tooling detail for two shot molding

Tooling note: the transfer position and shut-off geometry must keep the rigid and flexible zones aligned without flash at the interface.

ENGINEERING PRIORITIES

Material compatibility: confirm adhesion, shrinkage and processing windows for the rigid and flexible materials.

Interface control: design shut-offs and venting to limit flash, short shots and visible mismatch.

Deformation management: balance cooling and ejection around the thin folding zone and thicker support rim.

Machine validation: check platen size, tie-bar spacing, shot capacity, rotary transfer and hot-runner controls before tool approval.

Finished two color collapsible basin in folded and expanded positions

Product note: the folding ribs must flex repeatedly while the rim maintains dimensional stability in both expanded and stored positions.

FREQUENTLY ASKED QUESTIONS

Which materials can be used?
A rigid-plus-flexible pair such as PP+TPE may be evaluated, but the final choice depends on bonding, food-contact needs, hardness and cycle targets.

Is 1+1 cavity fixed?
No. The published reference uses 1+1 cavities. Production volume, machine capacity and part geometry determine the final cavity strategy.

What information is needed for a quotation?
Please provide 2D/3D product data, resin grades, target annual volume, molding machine specifications and quality requirements.

PLAN YOUR FOLDABLE HOUSEWARE MOLD

Send your product drawing, material requirements and molding-machine data for a practical DFM and tooling review.