HOUSEHOLD · PP + TPE · 1+1 CAVITY
2K COLLAPSIBLE LAUNDRY BASKET MOLD
Large two-shot tooling for collapsible laundry baskets that combine a rigid PP frame with flexible TPE folding sections. The published reference configuration is designed around a 550-ton two-color injection machine.

REFERENCE TOOLING SPECIFICATIONS
- Material: PP + TPE
- Cavity: 1+1
- Mold steel: 718
- Runner system: 12-tip hot runner
- Mold dimensions: 1160 × 970 × 585 mm
- Mold weight: 3752 kg
- Suggested machine: 550-ton two-color injection molding machine
APPLICATION & ENGINEERING FOCUS
The mold produces a full-size household basket with rigid load-bearing areas, flexible collapse zones and comfort-grip features. The part design must maintain uniform folding behavior while protecting the PP/TPE bond during repeated opening, closing and carrying.

KEY ENGINEERING POINTS
- The rigid frame, flexible walls and handle zones require coordinated shrinkage and well-controlled material boundaries.
- Large-part cooling balance and deformation control are essential for repeatable basket geometry.
- The 12-point runner layout must be reviewed for balanced filling and acceptable weld-line placement.
- Folding life, load capacity and bond durability should be validated using production resin grades and representative molded samples.

FREQUENTLY ASKED QUESTIONS
Why is a 550-ton machine suggested?
The published reference mold is large and heavy. Final machine selection must still be checked against clamp force, tie-bar spacing, opening stroke, shot capacity and mold-handling limits.
Can different PP and TPE grades be used?
Yes, but the selected pair must be tested for adhesion, shrinkage compatibility, folding fatigue and the required surface feel.
What should be supplied before DFM review?
Provide the complete 3D product file, preferred resin grades, target basket load, folding-life requirement, annual demand and available machine data.
REQUEST A CUSTOM MOLD REVIEW
Send your 3D drawing, resin grades, annual quantity and available two-shot machine data. Focare will review the part structure and recommend a tooling configuration.
Reference specifications and images are based on publicly available Focare Mould product information. Final steel, cavity layout, runner system and machine selection must be confirmed against the customer’s part drawing and production requirements.
