SEALING · 75 MM · 8+8 CAVITY
TWO COLOR 75MM SEAL RING MOLD
Precision two-color tooling for 75 mm seal rings used in pipe-fitting and sealing applications. The published reference configuration combines an 8+8 cavity layout, European 2316 steel and a 16-tip YUDO hot-runner system.

REFERENCE TOOLING SPECIFICATIONS
- Nominal size: 75 mm
- Cavity: 8+8
- Mold steel: European imported 2316
- Runner system: YUDO 16-tip hot runner
- Application: Two-color seal ring / SWR pipe fitting
- Process: Two-component injection molding
APPLICATION & ENGINEERING FOCUS
The two-color construction can combine a rigid supporting section with a softer sealing material in one coordinated molding cycle. Engineering review should focus on material adhesion, concentricity, sealing geometry and stable transfer between injection stages.

KEY ENGINEERING POINTS
- Cavity-to-cavity balance is critical for consistent ring dimensions and sealing performance.
- Steel selection and surface treatment should be confirmed for the actual resin, additives and expected maintenance interval.
- Gate vestige, weld-line location and venting must be evaluated around the sealing surface.
- Final part testing should include dimensional inspection and the customer’s applicable pressure or leakage validation.

FREQUENTLY ASKED QUESTIONS
Is 75 mm the only available size?
No. Focare also publishes 110 mm and 160 mm reference configurations. Final size and cavity count are customized to the part drawing and production target.
Which material pair should be used?
The exact rigid and elastomer grades must be selected according to sealing performance, chemical exposure, temperature and required bond strength.
How is the machine selected?
Selection depends on mold size, opening stroke, tie-bar spacing, clamp force and the shot capacity required for both materials.
REQUEST A CUSTOM MOLD REVIEW
Send your 3D drawing, resin grades, annual quantity and available two-shot machine data. Focare will review the part structure and recommend a tooling configuration.
Reference specifications and images are based on publicly available Focare Mould product information. Final steel, cavity layout, runner system and machine selection must be confirmed against the customer’s part drawing and production requirements.
