Two-Color Plastic Electrical Junction Box Mold

Electrical Parts Mold · PP + TPE

Two-Color Plastic Electrical Junction Box Mold

Two-component injection tooling for electrical enclosures that combine a rigid PP structure with an integrated TPE sealing area. The design supports repeatable rigid-to-soft interfaces while reducing separate seal assembly.

PP TPE two-color electrical junction box molded parts
Rigid PP enclosure parts with integrated soft sealing areas. Image source: Focare Mould.

Product Overview

Focare Mould develops two-color plastic electrical junction box molds for common 80 × 80 mm, 100 × 100 mm and 150 × 110 mm enclosure formats. Final cavity count, gate position and machine interface are confirmed after reviewing the customer’s 3D part data, selected material grades, sealing requirement and production volume.

PP + TPERigid enclosure structure with an integrated soft sealing feature.
H13Published core and cavity steel reference at 48–50 HRC.
1+1 / 2+2Cavity layouts selected according to part size and production target.

Verified Reference Specifications

Product format Weight Cavity layout Runner / gate
80 × 80 mm 61 g Lid: 2 cavity; body: 2+2 two-color Lid: cold runner; body: 4-tip hot runner
100 × 100 mm 88 g Lid: 2 cavity; body: 2+2 two-color Lid: cold runner; body: 4-tip hot runner
150 × 110 mm 133 g Lid: 2 cavity; body: 1+1 two-color Lid: cold runner; body: 2-tip hot runner
two-color electrical junction box injection mold tooling
Reference two-color tooling configuration for an electrical enclosure. Final mold layout is matched to the customer’s machine.

Engineering Focus

Rigid-to-Soft Interface Control

The PP substrate geometry, TPE shut-off and second-shot flow path are reviewed together. Focare evaluates the sealing path, mechanical interlock opportunities and material compatibility before freezing the mold concept.

Balanced Filling

For 2+2 cavity body molds, runner balance and gate placement influence both rigid-part consistency and second-shot sealing uniformity. Mold-flow analysis can be added when geometry or wall-thickness transitions require additional verification.

Shut-Off and Flash Prevention

The TPE sealing boundary needs stable steel shut-off conditions. Parting-line selection, local venting and steel protection are planned to reduce flash risk around the soft seal.

Cooling and Dimensional Stability

Cooling channels are arranged around enclosure walls, corners and the sealing interface to control warpage before the second shot and maintain repeatable assembly dimensions.

electrical junction box mold cavity and sealing detail
Mold details are reviewed around the rigid-to-soft sealing boundary rather than treating the soft seal as a separate afterthought.

Applications

  • Outdoor electrical junction boxes
  • Cable connection enclosures
  • Utility and control housings
  • Dust-resistant and water-resistant enclosure designs
  • Color-coded electrical or installation components

Machine and Quality Review

Focare reviews platen size, tie-bar spacing, shot volume, injection-unit arrangement, rotary or transfer concept, nozzle position and ejection interface before manufacture. Trial approval can include first-shot dimensional inspection, second-shot seal continuity, flash and short-shot review, gate-mark inspection, assembly fit and customer-defined ingress testing.

Important: IP ratings are product-level performance claims. They must be verified on the complete enclosure assembly using the customer’s required standard and test conditions.

FAQ

Can the mold be designed for different enclosure sizes?

Yes. The published sizes are references. Final tooling is designed around the customer’s part drawing and molding machine.

Why use PP + TPE?

PP provides the rigid enclosure structure, while a compatible TPE can create an integrated soft sealing feature. Compatibility must be confirmed with the selected grades.

Can Focare support 1+1 and 2+2 cavity layouts?

Yes. Cavity layout is selected according to part size, annual volume, machine capacity and runner strategy.

Does the mold automatically guarantee IP66 or IP67?

No. The mold can support a sealing-oriented design, but final performance depends on the complete enclosure, materials, process window, assembly and verified testing.

Request an Engineering Review

Send your 3D drawing, PP/TPE grades, target ingress requirement, annual volume and machine specification. Focare will review the cavity layout, gating concept and mold-machine interface.

REQUEST A MOLD QUOTATION