Cap & Closure · PP + TPE · 4+4 Cavities

Two-Color Sport Water Bottle Cap Mold

Production tooling for a rigid PP closure with a flexible TPE carrying handle, engineered around balanced dual hot runners, repeatable sealing geometry and rotary-table two-color molding.

GET DFM & QUOTATION
Two-color sport water bottle cap mold design with PP and TPE cap components
Reference 3D tooling concept showing the PP closure and flexible TPE handle arrangement.
Finished pink and turquoise two-color sport water bottle caps with carrying handle
Finished two-color sport bottle caps illustrating the rigid-to-soft interface and carrying handle.
Assembly concept for a PP and TPE two-color sport bottle cap and handle
Assembly reference used to review bottle-neck fit, opening access and handle movement.
Close-up of molded two-color sport water bottle cap parts and flexible handle
Close-up reference for color boundaries, surface finish and flexible handle geometry.
Reference Tooling Specification

Published Project Data

MaterialPP + TPE
Cavity4+4
Hot Runner4 tips + 4 tips
Mold Steel1.2344 / 46–48 HRC
Mold Size800 × 500 × 421 mm
Suggested Machine280T two-color rotary table

Reference mold weight: 996 kg. Final cavity count, resin grades, shrinkage, runner layout and machine interface are confirmed against the customer drawing and production target.

Engineering Focus

Sealing, Handle Function & Repeatability

Rigid-to-soft interface

Steel shut-offs, venting and material compatibility are reviewed to reduce flash and visible mismatch around the flexible TPE handle.

Balanced dual hot runners

Separate four-tip systems for each color support controlled filling across the 4+4 cavity arrangement.

Closure sealing

Bottle-neck finish, sealing land and cap dimensions are validated through sampling and customer-defined leak testing.

Machine integration

Rotary-table diameter, nozzle positions, platen layout, ejector interface and shot capacity are checked before final mold design.

Applications

Where This Mold Concept Fits

Sport and outdoor water bottles, portable hydration products, travel bottles, two-component closures with flexible handles, and branded color-coded cap assemblies.

Frequently Asked Questions

Why combine PP and TPE?

PP supports the rigid closure while a compatible TPE provides flexibility and grip. Exact grades and adhesion must be validated before tooling.

Is the 4+4 cavity layout fixed?

No. The published reference uses 4+4 cavities; final output depends on geometry, annual volume, machine capacity and cycle target.

What is needed for a quotation?

Send the 3D cap and bottle-neck models, 2D drawings, resin grades, annual volume, leak-test requirements and target machine model.

START YOUR CAP MOLD PROJECT